Guides & Installation
Step-by-step installation, wiring, and mounting guides.
Browse Topics
Start Here — Complete Guide
How To Wire LED Strip Lights: Step-by-Step for Beginners
Wire LED strip lights to a compatible 12V or 24V power supply. Step-by-step guide covers soldering, connectors, parallel wiring, and switches.
More Articles
9 articles
5 Best Dimmer Switch for LED Lights - LedLightsGeek
The best LED dimmer switches: Lutron Caseta for smart homes and Leviton Decora SureSlide for budget installs, both stop flickering and buzzing.
How To Cut LED Strip Lights the Right Way
Cut LED strip lights only at cut lines between copper pads using sharp scissors or a craft knife. Cutting elsewhere breaks the circuit and ruins that section.
How To Dim LED Lights- LedLightsGeek
Dim LED lights with an LED-compatible dimmer, smart bulb, or PWM dimmer. Avoid old incandescent dimmers - they cause flickering.
How To Make LED Lights: DIY Guide
Make LED lights by connecting LEDs in series or parallel with resistors to a DC power source. Covers single LEDs, strips, and custom panels.
How To Connect LED Strip Lights- LedlLightsGeek
Connect LED strips with clip connectors, solder, or wire jumpers. Match voltage, polarity, strip type, and don’t exceed the max run length.
How To Connect LED Lights To Phone
Connect LED lights to your phone using the manufacturer's app over Wi-Fi or Bluetooth. Works with Govee, Philips Hue, LIFX, and most smart LED strips.
How To Convert 4ft Fluorescent Light To LED
Convert a 4ft fluorescent to LED with a plug-and-play Type A tube or ballast-bypass Type B tube. Saves 50% on energy with flicker-free light.
LED Strip Lights Turn Blue When Powered Off- LedLightsGeek
LED strips turning blue when off is caused by residual current leaking through the controller. Fix it with a relay switch or bleeder resistor.
How To Change Fluorescent Light To LED- LedLightsGeek
Change fluorescent light to LED using plug-and-play (Type A), ballast-bypass (Type B), or fixture replacement with step-by-step instructions.